1	
[    0.000000] Kernel command line: root=/dev/sda console=tty0 console=ttyS0
2	
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
3	
[    0.000000] Initializing CPU#0
4	
[    0.000000] Checking aperture...
5	
[    0.000000] No AGP bridge found
6	
[    0.000000] Memory: 1508116k/1548276k available (3156k kernel code, 388k absent, 39772k reserved, 2068k data, 604k init)
7	
[    0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
8	
[    0.000000] Hierarchical RCU implementation.
9	
[    0.000000] NR_IRQS:4352 nr_irqs:424
10	
[    0.000000] Console: colour VGA+ 80x25
11	
[    0.000000] console [tty0] enabled
12	
[    0.000000] console [ttyS0] enabled
13	
[    0.000000] Detected 2666.760 MHz processor.
14	
[    0.008000] Calibrating delay loop (skipped) preset value.. 5333.52 BogoMIPS (lpj=10667040)
15	
[    0.008000] Security Framework initialized
16	
[    0.008000] SELinux:  Disabled at boot.
17	
[    0.008185] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
18	
[    0.010934] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
19	
[    0.012734] Mount-cache hash table entries: 256
20	
[    0.013720] Initializing cgroup subsys ns
21	
[    0.014477] Initializing cgroup subsys cpuacct
22	
[    0.016008] Initializing cgroup subsys devices
23	
[    0.016833] Initializing cgroup subsys freezer
24	
[    0.017643] Initializing cgroup subsys net_cls
25	
[    0.018494] CPU: L1 I cache: 32K, L1 D cache: 32K
26	
[    0.020005] CPU: L2 cache: 4096K
27	
[    0.020657] CPU 0/0x0 -> Node 0
28	
[    0.021292] mce: CPU supports 10 MCE banks
29	
[    0.024037] Performance Events: unsupported p6 CPU model 15 no PMU driver, software events only.
30	
[    0.028346] ACPI: Core revision 20090903
31	
[    0.030322] Setting APIC routing to flat
32	
[    0.032001] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
33	
[    0.032004] CPU0: Intel(R) Core(TM)2 Duo CPU     T7700  @ 2.40GHz stepping 0b
34	
[    0.036001] Booting processor 1 APIC 0x1 ip 0x6000
35	
[    0.008000] Initializing CPU#1
36	
[    0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
37	
[    0.008000] CPU: L2 cache: 4096K
38	
[    0.008000] CPU 1/0x1 -> Node 0
39	
[    0.044641] CPU1: Intel(R) Core(TM)2 Duo CPU     T7700  @ 2.40GHz stepping 0b
40	
[    0.049057] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
41	
[    0.008000] kvm-clock: cpu 1, msr 0:1915741, secondary cpu clock
42	
[    0.056018] Brought up 2 CPUs
43	
[    0.056020] Total of 2 processors activated (10667.04 BogoMIPS).
44	
[    0.062935] devtmpfs: initialized
45	
[    0.069474] regulator: core version 0.5
46	
[    0.069474] NET: Registered protocol family 16
47	
[    0.072102] ACPI: bus type pci registered
48	
[    0.073190] PCI: Using configuration type 1 for base access
49	
[    0.074779] bio: create slab <bio-0> at 0
50	
[    0.080373] ACPI: Interpreter enabled
51	
[    0.081301] ACPI: (supports S0 S3 S4 S5)
52	
[    0.082615] ACPI: Using IOAPIC for interrupt routing
53	
[    0.087807] ACPI: No dock devices found.
54	
[    0.088025] ACPI: PCI Root Bridge [PCI0] (0000:00)
55	
[    0.090753] pci 0000:00:01.3: quirk: region b000-b03f claimed by PIIX4 ACPI
56	
[    0.092012] pci 0000:00:01.3: quirk: region b100-b10f claimed by PIIX4 SMB
57	
[    0.103060] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
58	
[    0.104527] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
59	
[    0.106172] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
60	
[    0.107851] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
61	
[    0.108857] ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0
62	
[    0.110549] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
63	
[    0.112005] vgaarb: loaded
64	
[    0.112823] PCI: Using ACPI for IRQ routing
65	
[    0.116022] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
66	
[    0.118112] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
67	
[    0.120006] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
68	
[    0.128051] Switching to clocksource kvm-clock
69	
[    0.134437] pnp: PnP ACPI init
70	
[    0.135577] ACPI: bus type pnp registered
71	
[    0.137909] pnp: PnP ACPI: found 8 devices
72	
[    0.138688] ACPI: ACPI bus type pnp unregistered
73	
[    0.144735] NET: Registered protocol family 2
74	
[    0.145739] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
75	
[    0.147798] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
76	
[    0.152398] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
77	
[    0.154322] TCP: Hash tables configured (established 262144 bind 65536)
78	
[    0.155461] TCP reno registered
79	
[    0.156178] NET: Registered protocol family 1
80	
[    0.157028] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
81	
[    0.158083] pci 0000:00:01.0: PIIX3: Enabling Passive Release
82	
[    0.159109] pci 0000:00:01.0: Activating ISA DMA hang workarounds
83	
[    0.163968] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
84	
[    0.164997] pci 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
85	
[    0.166875] pci 0000:00:01.2: PCI INT D disabled
86	
[    0.167984] Unpacking initramfs...
87	
[    0.370550] Freeing initrd memory: 9589k freed
88	
[    0.373865] audit: initializing netlink socket (disabled)
89	
[    0.374867] type=2000 audit(1379075570.372:1): initialized
90	
[    0.380479] HugeTLB registered 2 MB page size, pre-allocated 0 pages
91	
[    0.384758] VFS: Disk quotas dquot_6.5.2
92	
[    0.386143] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
93	
[    0.388105] msgmni has been set to 2964
94	
[    0.390259] alg: No test for stdrng (krng)
95	
[    0.391688] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
96	
[    0.393141] io scheduler noop registered
97	
[    0.393907] io scheduler anticipatory registered
98	
[    0.394766] io scheduler deadline registered
99	
[    0.395630] io scheduler cfq registered (default)
100	
[    0.397906] Linux agpgart interface v0.103
101	
[    0.398750] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
102	
[    0.400031] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
103	
[    0.401286] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
104	
[    0.402678] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
105	
[    0.403862] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
106	
[    0.404981] input: Macintosh mouse button emulation as /devices/virtual/input/input0
107	
[    0.406477] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
108	
[    0.408518] serio: i8042 KBD port at 0x60,0x64 irq 1
109	
[    0.409459] serio: i8042 AUX port at 0x60,0x64 irq 12
110	
[    0.410492] mice: PS/2 mouse device common for all mice
111	
[    0.411693] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
112	
[    0.413536] rtc_cmos 00:01: RTC can wake from S4
113	
[    0.414429] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
114	
[    0.415570] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
115	
[    0.416719] cpuidle: using governor ladder
116	
[    0.417518] cpuidle: using governor menu
117	
[    0.418276] No iBFT detected.
118	
[    0.419144] TCP cubic registered
119	
[    0.419913] NET: Registered protocol family 10
120	
[    0.421355] Mobile IPv6
121	
[    0.421914] NET: Registered protocol family 17
122	
[    0.422836] registered taskstats version 1
123	
[    0.423875] rtc_cmos 00:01: setting system clock to 2013-09-13 12:32:49 UTC (1379075569)
124	
[    0.425467] Initalizing network drop monitor service
125	
[    0.426439] Freeing unused kernel memory: 604k freed
126	
[    0.427560] Write protecting the kernel read-only data: 4344k
127	
Loading, please wait...
128	
[    0.442706] udev[56]: starting version 164
129	
[    0.507229] usbcore: registered new interface driver usbfs
130	
[    0.507613] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
131	
[    0.507636] virtio-pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, high) -> IRQ 10
132	
[    0.511338] usbcore: registered new interface driver hub
133	
[    0.512405] usbcore: registered new device driver usb
134	
[    0.518530] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
135	
[    0.518939] SCSI subsystem initialized
136	
[    0.529420] uhci_hcd: USB Universal Host Controller Interface driver
137	
[    0.530576] uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
138	
[    0.532180] uhci_hcd 0000:00:01.2: UHCI Host Controller
139	
[    0.533155] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
140	
[    0.534630] uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c000
141	
[    0.538798] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
142	
[    0.539500] FDC 0 is a S82078B
143	
[    0.541013] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
144	
[    0.542647] usb usb1: Product: UHCI Host Controller
145	
[    0.543677] usb usb1: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd
146	
[    0.544894] usb usb1: SerialNumber: 0000:00:01.2
147	
[    0.546086] usb usb1: configuration #1 chosen from 1 choice
148	
[    0.547437] hub 1-0:1.0: USB hub found
149	
[    0.548407] hub 1-0:1.0: 2 ports detected
150	
[    0.549937] scsi0 : ata_piix
151	
[    0.550928] scsi1 : ata_piix
152	
[    0.551793] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc040 irq 14
153	
[    0.553365] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc048 irq 15
154	
[    0.709305] ata1.00: ATA-7: QEMU HARDDISK, 1.0, max UDMA/100
155	
[    0.710778] ata1.00: 4194304 sectors, multi 16: LBA48
156	
[    0.712500] ata1.00: configured for MWDMA2
157	
[    0.717801] scsi 0:0:0:0: Direct-Access     ATA      QEMU HARDDISK    1.0  PQ: 0 ANSI: 5
158	
[    0.726593] sd 0:0:0:0: [sda] 4194304 512-byte logical blocks: (2.14 GB/2.00 GiB)
159	
[    0.729212] sd 0:0:0:0: [sda] Write Protect is off
160	
[    0.738809] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
161	
[    0.740617]  sda: unknown partition table
162	
[    0.743254] sd 0:0:0:0: [sda] Attached SCSI disk
163	
Begin: Loading essential drivers ... done.
164	
Begin: Running /scripts/init-premount ... done.
165	
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... [    0.836410] device-mapper: uevent: version 1.0.3
166	
[    0.838261] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
167	
done.
168	
[    0.861406] usb 1-1: new full speed USB device using uhci_hcd and address 2
169	
Begin: Waiting for root file system ... [    1.208949] usb 1-1: New USB device found, idVendor=0627, idProduct=0001
170	
[    1.210290] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=5
171	
[    1.211545] usb 1-1: Product: QEMU USB Tablet
172	
[    1.212648] usb 1-1: Manufacturer: QEMU 1.0
173	
[    1.213699] usb 1-1: SerialNumber: 42
174	
[    1.215064] usb 1-1: configuration #1 chosen from 1 choice
175	
[    1.232049] usbcore: registered new interface driver hiddev
176	
[    1.258040] input: QEMU 1.0 QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/input/input2
177	
[    1.260091] generic-usb 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU 1.0 QEMU USB Tablet] on usb-0000:00:01.2-1/input0
178	
[    1.262486] usbcore: registered new interface driver usbhid
179	
[    1.263623] usbhid: v2.6:USB HID core driver
180	
done.
181	
Begin: Running /scripts/local-premount ... done.
182	
mount: mounting /dev/sda on /root failed: No such file or directory
183	
Begin: Running /scripts/local-bottom ... done.
184	
done.
185	
Begin: Running /scripts/init-bottom ... mount: mounting /dev on /root/dev failed: No such file or directory
186	
done.
187	
mount: mounting /sys on /root/sys failed: No such file or directory
188	
mount: mounting /proc on /root/proc failed: No such file or directory
189	
Target filesystem doesn't have requested /sbin/init.
190	
No init found. Try passing init= bootarg.