Jeremy Davis's picture
Jeremy Davis - Tue, 2023/04/18 - 09:16

Hi,

Chances are if you're reading this, you have applied for a TurnKey website user account.

Considering that 95% of all signups are spammers and/or seo farmers, plus the hammering the site has got from spammers earlier in the year, blocking auto signups was probably overdue. However, it can be really hard to tell the difference between a potential spammer and a legitimate user. So I'm almost certain that I delete legitimate accounts when I cleanup the obvious spammer ones.

So this thread has 2 main purposes:

  1. A place where prospective users, waiting for account approval, can introduce themselves, share a little about what they are using TurnKey for and demonstrate that they are a legitimate human; and
  2. A place where TurnKey users who are looking for support can post their question(s)/issue(s) while they are awaiting account approval.

Intro post

The first is pretty self explanatory, but I anticipate that spammers and seo farmers will want to try to game the system and will likely post friendly messages in the hope that they will convince me. So if you fit into this category, please be sure to mention specifically which appliance you are running (or plan to run) and on what platform. Also if you can give some context to your username and/or email, that might help me too. I'm not going to go into what sort of things I use to tell the difference (because spammers will adapt their behaviors) but I'm hoping that this will give some solid hints for legit users, but won't get read by too many spammers. One thing I can say is that the more detail you share, the harder it is to "fake" it, the more specific you can be, the less likely you are to be a spammer.

Guest support post

For the second category, please be sure to include lots of info. The reason for that is two-fold. Firstly, so I can tell you're not faking it to try to get your spam account enabled. Secondly, so that we can provide a useful response (rather than just asking you more questions). Definitely include the specific TurnKey appliance and version that you are using (and/or the output of 'turnkey-version'), plus details of the problem you are experiencing or thing you are trying to do but need advice on. Please provide as much info as possible.

Final words

If you're still reading, I'm almost certain that you aren't a spammer. Please post a new post below (as a guest). In the provided space for email address (which won't be publicly visible), please be sure to include the same email as you used for your account signup. Please note that your post may need to be manually reviewed before it is public visible.

Note too that support type posts will be moved. Other posts might be cleaned up from time to time too, so please don't be put off if there are no posts below.

Forum: 
General
Brian Barker's picture

Brian Barker - Tue, 2024/10/15 - 19:58

Hello! I just started using the TurnKey Linux containers today in ProxMox and am trying to make this account

Mattalynn Darden's picture

Mattalynn Darden - Mon, 2024/10/28 - 04:55

We’re excited to have you on board. Your account is now active, and you’re all set to explore our resources and get started with our appliances.

If you’re new to TurnKey Linux, I recommend checking out the Getting Started Guide and our Support Forums for community discussions and tips. You might also find our Documentation Hub helpful as you dive in.

Feel free to reach out if you need any assistance. We’re here to help and happy to have you as part of the TKL community!

Josiah's picture

Josiah - Tue, 2024/10/15 - 23:28

Hey! I'm trying to sign up for an account here, I want to use a turnkey based OS called MineOS for hosting a minecraft server, and the setup told me I needed a turnkey account for some reason, so here I am lol

Mattalynn Darden's picture

Mattalynn Darden - Mon, 2024/10/28 - 04:58

We’re excited to have you on board. Your account is now active, and you’re all set to explore our resources and get started with our appliances.

If you’re new to TurnKey Linux, I recommend checking out the Getting Started Guide and our Support Forums for community discussions and tips. You might also find our Documentation Hub helpful as you dive in.

Feel free to reach out if you need any assistance. We’re here to help and happy to have you as part of the TKL community!

To get an API key or use TKL Hub, you'll need to sign up (separately) to the TurnKey Hub – although you won't need to wait over there. If you have any Hub-specific questions, please don't hesitate to reach out via the built-in Hub support (blue icon down the bottom left of the page once signed in).

Darryl Quinn's picture

Darryl Quinn - Wed, 2024/10/16 - 07:19

Hi. Looking for account approval.

Mattalynn Darden's picture

Mattalynn Darden - Mon, 2024/10/28 - 05:00

We’re excited to have you on board. Your account is now active, and you’re all set to explore our resources and get started with our appliances.

If you’re new to TurnKey Linux, I recommend checking out the Getting Started Guide and our Support Forums for community discussions and tips. You might also find our Documentation Hub helpful as you dive in.

Feel free to reach out if you need any assistance. We’re here to help and happy to have you as part of the TKL community!

Michael Wirz's picture

Michael Wirz - Wed, 2024/10/16 - 09:55

I learned about Turnkey when I started experimenting with containers in Proxmox. I would love to try out the config syncing and see what all is possible.

If you could activate my account, that would be great.

Thanks and greetings from Switzerland
Michael

Mattalynn Darden's picture

Mattalynn Darden - Mon, 2024/10/28 - 05:03

We’re excited to have you on board. Your account is now active, and you’re all set to explore our resources and get started with our appliances.

If you’re new to TurnKey Linux, I recommend checking out the Getting Started Guide and our Support Forums for community discussions and tips. You might also find our Documentation Hub helpful as you dive in.

Feel free to reach out if you need any assistance. We’re here to help and happy to have you as part of the TKL community!

To get an API key or use TKL Hub, you'll need to sign up (separately) to the TurnKey Hub – although you won't need to wait over there. If you have any Hub-specific questions, please don't hesitate to reach out via the built-in Hub support (blue icon down the bottom left of the page once signed in).

Oddmar Dam's picture

Oddmar Dam - Wed, 2024/10/16 - 16:42

I am looking forward for approval.

Mattalynn Darden's picture

Mattalynn Darden - Mon, 2024/10/28 - 05:05

We’re excited to have you on board. Your account is now active, and you’re all set to explore our resources and get started with our appliances.

If you’re new to TurnKey Linux, I recommend checking out the Getting Started Guide and our Support Forums for community discussions and tips. You might also find our Documentation Hub helpful as you dive in.

Feel free to reach out if you need any assistance. We’re here to help and happy to have you as part of the TKL community!

Martin Frankhouse's picture

Martin Frankhouse - Thu, 2024/10/17 - 18:35

I am interested is taking the Turnkey Fileserver for a test drive to see how a virtualized NAS will work within our VmWare environment. I need to see the documentation to see what needs to be configured on our end and to obtain the virtual appliance.

Thanks,
Martin Frankhouse

Mattalynn Darden's picture

Mattalynn Darden - Mon, 2024/10/28 - 05:09

We’re excited to have you on board. Your account is now active, and you’re all set to explore our resources and get started with our appliances.

If you’re new to TurnKey Linux, I recommend checking out the Getting Started Guide and our Support Forums for community discussions and tips. You might also find our Documentation Hub helpful as you dive in.

Feel free to reach out if you need any assistance. We’re here to help and happy to have you as part of the TKL community!

Pierre-Luc Bertrand's picture

Pierre-Luc Bertrand - Sun, 2024/10/20 - 08:03

Approval pretty please?

Mattalynn Darden's picture

Mattalynn Darden - Mon, 2024/10/28 - 05:46

We’re excited to have you on board. Your account is now active, and you’re all set to explore our resources and get started with our appliances.

If you’re new to TurnKey Linux, I recommend checking out the Getting Started Guide and our Support Forums for community discussions and tips. You might also find our Documentation Hub helpful as you dive in.

Feel free to reach out if you need any assistance. We’re here to help and happy to have you as part of the TKL community!

Joe Mild's picture

Joe Mild - Sun, 2024/10/20 - 20:50

I'm excited to share that I've submitted my application and am now eagerly awaiting
approval. I'm really looking forward to joining this amazing platform and can't wait to get started!

Mattalynn Darden's picture

Mattalynn Darden - Mon, 2024/10/28 - 05:49

We’re excited to have you on board. Your account is now active, and you’re all set to explore our resources and get started with our appliances.

If you’re new to TurnKey Linux, I recommend checking out the Getting Started Guide and our Support Forums for community discussions and tips. You might also find our Documentation Hub helpful as you dive in.

Feel free to reach out if you need any assistance. We’re here to help and happy to have you as part of the TKL community!

Lee W's picture

Lee W - Tue, 2024/10/22 - 01:16

Greetings,

I'm requesting a forum account. I've tried several appliances and am having some issues with several of them I was hoping others could help me sort out. Lately, I've been playing with Bugzilla, Mantis, and Roundup, but have also used Bookstack and over the years, tried a few others.

BTW, are you aware (I tried emailing support weeks ago), that Collabtive is broken (download link doesn't work). It looks old and potentially unsupported... maybe time to remove?

Thanks!

Mattalynn Darden's picture

Mattalynn Darden - Mon, 2024/10/28 - 06:16

We’re excited to have you on board. Your account is now active, and you’re all set to explore our resources and get started with our appliances.

If you’re new to TurnKey Linux, I recommend checking out the Getting Started Guide and our Support Forums for community discussions and tips. You might also find our Documentation Hub helpful as you dive in.

Feel free to reach out if you need any assistance. We’re here to help and happy to have you as part of the TKL community!

Thanks for the heads-up on Collabtive! We’ll look into the broken link and evaluate the status of Collabtive to see if it needs updating or removal from the downloads. If you spot anything else, please feel free to let us know.

Happy exploring with Bugzilla, Mantis, Roundup, and Bookstack! Let us know if there’s anything specific we can assist with.

Jeremy Davis's picture

Jeremy Davis - Fri, 2024/11/15 - 04:36

Thanks again for reporting the broken download links. I have now updated the Collabtive page with a note re it's status and removed the broken download links.

To save you a click, here is the context info I added:

The Collabtive software is no longer being maintained by the upstream developer and has not had a stable release for a number of years. It is not compatible with the currently supported PHP versions and likely has unpatched security issues.

As Mattie said, feel free to start a new thread in the forums if you need support and/or have specific or general feedback for us. We welcome all feedback; the good, the bad and the ugly!

FYI bug reports and feature requests can be posted straight to our issue tracker if you want (requires free GitHub account). Although posting in the forums is fine too. If you do, please include the specific appliance and version you're using and any other relevant info. Steps to reproduce bugs make resolution quicker and bonus points for sharing any fixes/workaround/implementation details if you work it out yourself! :)

PS I've been away for a few weeks - although support has been monitored in my absence. So I'm not sure why you didn't get any response there? I'll look into that.

EricThivierge's picture

EricThivierge - Tue, 2024/10/22 - 19:48

Hi Turnkey team

As requested, here is my guest comment kindly requesting my account approval.

Thx in advance
and very best regards
Eric

Mattalynn Darden's picture

Mattalynn Darden - Mon, 2024/10/28 - 06:19

We’re excited to have you on board. Your account is now active, and you’re all set to explore our resources and get started with our appliances.

If you’re new to TurnKey Linux, I recommend checking out the Getting Started Guide and our Support Forums for community discussions and tips. You might also find our Documentation Hub helpful as you dive in.

Feel free to reach out if you need any assistance. We’re here to help and happy to have you as part of the TKL community!

SoulofSorrow's picture

SoulofSorrow - Wed, 2024/10/23 - 10:32

Hey I have a Proxmox and would like to switch my applications to TurnKey to have additional features and extend the environment easily.

Yours sincerely
Julian Schäfer

Mattalynn Darden's picture

Mattalynn Darden - Mon, 2024/10/28 - 06:20

We’re excited to have you on board. Your account is now active, and you’re all set to explore our resources and get started with our appliances.

If you’re new to TurnKey Linux, I recommend checking out the Getting Started Guide and our Support Forums for community discussions and tips. You might also find our Documentation Hub helpful as you dive in.

Feel free to reach out if you need any assistance. We’re here to help and happy to have you as part of the TKL community!

Kris Wojcikolski's picture

Kris Wojcikolski - Wed, 2024/10/23 - 13:28

Hey there,

I'm working as a IT system administrator at a German school and want to use some of your nicely preconfigured apps on our Proxmox nodes. I also use them in my homelab from time to time. But I just happen to have some questions about your "osCommerce" installation, since it says, that it is already registered to Gary Palmer. So I'd like to have access to the forums.

With kind regards
Kris Wojcikolski

Mattalynn Darden's picture

Mattalynn Darden - Mon, 2024/10/28 - 06:23

We’re excited to have you on board. Your account is now active, and you’re all set to explore our resources and get started with our appliances.

If you’re new to TurnKey Linux, I recommend checking out the Getting Started Guide and our Support Forums for community discussions and tips. You might also find our Documentation Hub helpful as you dive in.

Feel free to reach out if you need any assistance. We’re here to help and happy to have you as part of the TKL community!

eljoe's picture

eljoe - Fri, 2024/10/25 - 14:22

Heyo
Looking to experiment with proxmox with some wireguarding and some gameservering in the year of 1985. I work with the joe guy in some google mail type of space.
Thanks for the instructions, and im looking forward to being told how wrong my setup is in the forum!!
Thanks again

Mattalynn Darden's picture

Mattalynn Darden - Mon, 2024/10/28 - 06:26

We’re excited to have you on board. Your account is now active, and you’re all set to explore our resources and get started with our appliances.

If you’re new to TurnKey Linux, I recommend checking out the Getting Started Guide and our Support Forums for community discussions and tips. You might also find our Documentation Hub helpful as you dive in.

Feel free to reach out if you need any assistance. We’re here to help and happy to have you as part of the TKL community!

Steve Ries's picture

Steve Ries - Sat, 2024/10/26 - 08:54

Looking to get my account activated, I run a scanner radio system and have multiple sites that are remote. Currently use Synology VPN but looking to expand to a better system and have more options.
I loaded the ISO on a VM to take it for a test drive and now I'm ready to put it on some bare metal. Not going to be using an official appliance, looking to install it on an older used Dell Micro machine. Version 18.0 bookworm

Mattalynn Darden's picture

Mattalynn Darden - Mon, 2024/10/28 - 06:28

We’re excited to have you on board. Your account is now active, and you’re all set to explore our resources and get started with our appliances.

If you’re new to TurnKey Linux, I recommend checking out the Getting Started Guide and our Support Forums for community discussions and tips. You might also find our Documentation Hub helpful as you dive in.

Feel free to reach out if you need any assistance. We’re here to help and happy to have you as part of the TKL community!

Joe Mild's picture

Joe Mild - Sat, 2024/10/26 - 16:08

Hello,
looking forward to account activation.
Thank you & greetings
Joe

Mattalynn Darden's picture

Mattalynn Darden - Mon, 2024/10/28 - 06:29

We’re excited to have you on board. Your account is now active, and you’re all set to explore our resources and get started with our appliances.

If you’re new to TurnKey Linux, I recommend checking out the Getting Started Guide and our Support Forums for community discussions and tips. You might also find our Documentation Hub helpful as you dive in.

Feel free to reach out if you need any assistance. We’re here to help and happy to have you as part of the TKL community!

LeonW's picture

LeonW - Sun, 2024/10/27 - 13:45

Hi, I just created a new account and want to get it approved. Thanks in advance.

Mattalynn Darden's picture

Mattalynn Darden - Mon, 2024/10/28 - 06:32

We’re excited to have you on board. Your account is now active, and you’re all set to explore our resources and get started with our appliances.

If you’re new to TurnKey Linux, I recommend checking out the Getting Started Guide and our Support Forums for community discussions and tips. You might also find our Documentation Hub helpful as you dive in.

Feel free to reach out if you need any assistance. We’re here to help and happy to have you as part of the TKL community!

esrv's picture

esrv - Mon, 2024/10/28 - 19:58

Hello! I came here to gain a bit more knowledge about the Linux world and, if possible, to contribute as well.

Jeremy Davis's picture

Jeremy Davis - Tue, 2024/11/19 - 03:56

Great to have you on board. Your account is now active, and you’re all set to explore our resources and get started with our appliances.

If you’re new to TurnKey Linux, I recommend checking out the Getting Started Guide and our Support Forums for community discussions and tips. You might also find our Documentation Hub helpful as you dive in.

If you are after an API key, you'll need to sign up to the TurnKey Hub as well. For any Hub related questions, please ask via Hub support (little blue icon in the bottom right corner). Expected Hub support response time is within one work day.

Feel free to post on the forums if you need any general TurnKey assistance. We’re here to help and happy to have you as part of the TKL community!

Simplix Innovations's picture

Simplix Innovations - Tue, 2024/10/29 - 07:52

Hello! We just started using the TurnKey Linux containers today with ProxMox, and we're trying to create an account so we can get anything needed for our setups.
Thanks for your time!

Jeremy Davis's picture

Jeremy Davis - Tue, 2024/11/19 - 03:58

Great to have you on board. Your account is now active, and you’re all set to explore our resources and get started with our appliances.

If you’re new to TurnKey Linux, I recommend checking out the Getting Started Guide and our Support Forums for community discussions and tips. You might also find our Documentation Hub helpful as you dive in.

If you are after an API key, you'll need to sign up to the TurnKey Hub as well. For any Hub related questions, please ask via Hub support (little blue icon in the bottom right corner). Expected Hub support response time is within one work day.

Feel free to post on the forums if you need any general TurnKey assistance. We’re here to help and happy to have you as part of the TKL community!

Simplix Innovations's picture

Simplix Innovations - Tue, 2024/11/19 - 07:14

Many thanks @Jeremy Davis for approving the account. Happy to be on board.

Dedek Mraz's picture

Dedek Mraz - Tue, 2024/10/29 - 09:48

Hi! I'm just starting with Proxmox (8.2) LXC and of course TKL is right there inviting me to join. ;) I think I'll start with TKL Core to check how things are behaving on Proxmox cluster, and then just browse through your repository to find something of interest. Anyway, just wanted to say TKL seems to be providing great resources for us learn-wannabees...

Jeremy Davis's picture

Jeremy Davis - Tue, 2024/11/19 - 03:58

Great to have you on board. Your account is now active, and you’re all set to explore our resources and get started with our appliances.

If you’re new to TurnKey Linux, I recommend checking out the Getting Started Guide and our Support Forums for community discussions and tips. You might also find our Documentation Hub helpful as you dive in.

If you are after an API key, you'll need to sign up to the TurnKey Hub as well. For any Hub related questions, please ask via Hub support (little blue icon in the bottom right corner). Expected Hub support response time is within one work day.

Feel free to post on the forums if you need any general TurnKey assistance. We’re here to help and happy to have you as part of the TKL community!

Sarah Tylor's picture

Sarah Tylor - Tue, 2024/10/29 - 13:42

Hi,
This is Sarah Tylor. I just signed up for my account and waiting for approval. Hope so that it will be get approved soon.

Jeremy Davis's picture

Jeremy Davis - Tue, 2024/11/19 - 03:59

Great to have you on board. Your account is now active, and you’re all set to explore our resources and get started with our appliances.

If you’re new to TurnKey Linux, I recommend checking out the Getting Started Guide and our Support Forums for community discussions and tips. You might also find our Documentation Hub helpful as you dive in.

If you are after an API key, you'll need to sign up to the TurnKey Hub as well. For any Hub related questions, please ask via Hub support (little blue icon in the bottom right corner). Expected Hub support response time is within one work day.

Feel free to post on the forums if you need any general TurnKey assistance. We’re here to help and happy to have you as part of the TKL community!

Marc Thomas's picture

Marc Thomas - Tue, 2024/10/29 - 18:43

Hello Team, I’m experimenting with different appliances on Proxmox and like the concept of turnkey very much. I'm evaluating several appliances for our infrastructure and turnkey is a great starting point for an enthusiastic IT one man show.
Thanks in advance..

Jeremy Davis's picture

Jeremy Davis - Tue, 2024/11/19 - 04:00

Great to have you on board. Your account is now active, and you’re all set to explore our resources and get started with our appliances.

If you’re new to TurnKey Linux, I recommend checking out the Getting Started Guide and our Support Forums for community discussions and tips. You might also find our Documentation Hub helpful as you dive in.

If you are after an API key, you'll need to sign up to the TurnKey Hub as well. For any Hub related questions, please ask via Hub support (little blue icon in the bottom right corner). Expected Hub support response time is within one work day.

Feel free to post on the forums if you need any general TurnKey assistance. We’re here to help and happy to have you as part of the TKL community!

Octavio Bosio's picture

Octavio Bosio - Tue, 2024/10/29 - 21:00

Hello! I just want to test TurnKey appliances in Linux containers (ProxMox) and I am trying to activate my new account so I can get API Keys. Thanks!

Jeremy Davis's picture

Jeremy Davis - Tue, 2024/11/19 - 04:01

Great to have you on board. Your account is now active, and you’re all set to explore our resources and get started with our appliances.

If you’re new to TurnKey Linux, I recommend checking out the Getting Started Guide and our Support Forums for community discussions and tips. You might also find our Documentation Hub helpful as you dive in.

If you are after an API key, you'll need to sign up to the TurnKey Hub as well. For any Hub related questions, please ask via Hub support (little blue icon in the bottom right corner). Expected Hub support response time is within one work day.

Feel free to post on the forums if you need any general TurnKey assistance. We’re here to help and happy to have you as part of the TKL community!

Dim's picture

Dim - Sun, 2024/11/03 - 10:11

Hi all
Old user of your service just got here to check around
For some issues.

Jeremy Davis's picture

Jeremy Davis - Tue, 2024/11/19 - 04:03

Great to have you signed up here on the website. Your account is now active, and you’re all set to explore our resources and get started with our appliances.

If you are after an API key, you'll need to sign up to the TurnKey Hub as well. For any Hub related questions, please ask via Hub support (little blue icon in the bottom right corner). Expected Hub support response time is within one work day.

Feel free to post on the forums if you need any general TurnKey assistance or have anything to share. We’re here to help and happy to have you as part of the TKL community!

Greg's picture

Greg - Tue, 2024/11/05 - 02:25

Greg here to say hi, and tell you that I am a long time self-hoster since Slackware ran my TikiWiki website in 2003. I'm currently using docker-compose for my stuff, but want to move to Proxmox and LXC containers. I'm hoping Turnkey can help simplify the process. My specific Turnkey use case is invoiceninja.

Would love to get my account activated.

\\Greg Martin

\\Greg

Jeremy Davis's picture

Jeremy Davis - Tue, 2024/11/19 - 04:05

Great to have you on board. Your account is now active, and you’re all set to explore our resources and get started with our appliances.

If you’re new to TurnKey Linux, I recommend checking out the Getting Started Guide and our Support Forums for community discussions and tips. You might also find our Documentation Hub helpful as you dive in.

If you are after an API key, you'll need to sign up to the TurnKey Hub as well. For any Hub related questions, please ask via Hub support (little blue icon in the bottom right corner). Expected Hub support response time is within one work day.

Feel free to post on the forums if you need any general TurnKey assistance or have anything to share. We’re here to help and happy to have you as part of the TKL community!

Kellen Murphy's picture

Kellen Murphy - Wed, 2024/11/06 - 21:28

Hello, I want to get my account verified for use as well as get a question answered about archived app versions. I am unable to find any previous releases of turnkey apps, (specifically 14.0, the oldest jessie release). I want to use a handful of these ISO images (dokuwiki, wordpress, domain controller, and LAMP VM) for my educational pentesting environment and would appreciate further direction on the matter or some kind of resolution. Thanks!

Jeremy Davis's picture

Jeremy Davis - Tue, 2024/11/19 - 04:06

Great to have you on board. Your account is now active, and you’re all set to explore our resources and get started with our appliances.

If you’re new to TurnKey Linux, I recommend checking out the Getting Started Guide and our Support Forums for community discussions and tips. You might also find our Documentation Hub helpful as you dive in.

If you are after an API key, you'll need to sign up to the TurnKey Hub as well. For any Hub related questions, please ask via Hub support (little blue icon in the bottom right corner). Expected Hub support response time is within one work day.

Feel free to post on the forums if you need any general TurnKey assistance or have anything to share. We’re here to help and happy to have you as part of the TKL community!

Benjamin's picture

Benjamin - Tue, 2024/11/12 - 13:29

Hello, just installed Turnkey Nextcloud VM with ttecks scripts and need now a api.
hope u can unlock me soon. Thanks in advance!

Greetings from Germany!

Benjamin

Jeremy Davis's picture

Jeremy Davis - Tue, 2024/11/19 - 04:01

Great to have you on board. Your account is now active, and you’re all set to explore our resources and get started with our appliances.

If you’re new to TurnKey Linux, I recommend checking out the Getting Started Guide and our Support Forums for community discussions and tips. You might also find our Documentation Hub helpful as you dive in.

If you are after an API key, you'll need to sign up to the TurnKey Hub as well. For any Hub related questions, please ask via Hub support (little blue icon in the bottom right corner). Expected Hub support response time is within one work day.

Feel free to post on the forums if you need any general TurnKey assistance. We’re here to help and happy to have you as part of the TKL community!

dariods's picture

dariods - Wed, 2024/11/13 - 11:27

Happy to join this community, I'am trying turnkey for home lab.
Thank you

Jeremy Davis's picture

Jeremy Davis - Tue, 2024/11/19 - 04:02

Great to have you on board. Your account is now active, and you’re all set to explore our resources and get started with our appliances.

If you’re new to TurnKey Linux, I recommend checking out the Getting Started Guide and our Support Forums for community discussions and tips. You might also find our Documentation Hub helpful as you dive in.

If you are after an API key, you'll need to sign up to the TurnKey Hub as well. For any Hub related questions, please ask via Hub support (little blue icon in the bottom right corner). Expected Hub support response time is within one work day.

Feel free to post on the forums if you need any general TurnKey assistance. We’re here to help and happy to have you as part of the TKL community!

xalgorithm's picture

xalgorithm - Sat, 2024/11/16 - 20:58

Hello!
I am not a robot, of course a robot would say that. However, I can attest that I am a mind, a mind that thinks - if I think, then I exist. Which is something a robut could be programmed to say, with very little effort. What robut has not read Descartes?
Something, something your username might help clear things up. My username is as old as AOL. That's right, I am THAT old. Make old fart jokes at you're leisure.
I am using Turnkey bits on Proxmox. I fell into a yack shaving hole looking at scripts on https://community-scripts.github.io - which had a turnkey script, which I installed which then invited me to create an account, during installation, which leads me to here; yackshaving,..

Thanks for entertaining my BS, I look forward to working with you - beep-beep-booop

Jeremy Davis's picture

Jeremy Davis - Tue, 2024/11/19 - 04:10

Nice intro post! :) Apologies for (mostly) canned response... I promise forum responses are better!

Great to have you on board. Your account is now active, and you’re all set to explore our resources and get started with our appliances.

If you’re new to TurnKey Linux, I recommend checking out the Getting Started Guide and our Support Forums for community discussions and tips. You might also find our Documentation Hub helpful as you dive in.

If you are after an API key, you'll need to sign up to the TurnKey Hub as well. For any Hub related questions, please ask via Hub support (little blue icon in the bottom right corner). Expected Hub support response time is within one work day.

Feel free to post on the forums if you need any general TurnKey assistance. We’re here to help and happy to have you as part of the TKL community!

Ian Hobson's picture

Ian Hobson - Sun, 2024/11/17 - 10:43

Hi,
I am looking for the LXC template for ansible .
All I have been able to find so far are check sums and an ISO, which i can't use with proxmox
(or rather it would create a VM, not a Container, and I doubt I have the CPU or memory for that).
I am a retired software developer, setting up a home lab on a tiny Chuwi Larkbox - 4cpu, 12gb RAM and 512GB of storage.
Regards
Ian

Jeremy Davis's picture

Jeremy Davis - Tue, 2024/11/19 - 04:08

Great to have you on board. Your account is now active, and you’re all set to explore our resources and get started with our appliances.

If you’re new to TurnKey Linux, I recommend checking out the Getting Started Guide and our Support Forums for community discussions and tips. You might also find our Documentation Hub helpful as you dive in.

If you are after an API key, you'll need to sign up to the TurnKey Hub as well. For any Hub related questions, please ask via Hub support (little blue icon in the bottom right corner). Expected Hub support response time is within one work day.

Feel free to post on the forums if you need any general TurnKey assistance. We’re here to help and happy to have you as part of the TKL community!

Alok Negi's picture

Alok Negi - Mon, 2024/11/18 - 08:00

Hi! I am Alok Negi. Please approve my account

Jeremy Davis's picture

Jeremy Davis - Tue, 2024/11/19 - 04:08

Great to have you on board. Your account is now active, and you’re all set to explore our resources and get started with our appliances.

If you’re new to TurnKey Linux, I recommend checking out the Getting Started Guide and our Support Forums for community discussions and tips. You might also find our Documentation Hub helpful as you dive in.

If you are after an API key, you'll need to sign up to the TurnKey Hub as well. For any Hub related questions, please ask via Hub support (little blue icon in the bottom right corner). Expected Hub support response time is within one work day.

Feel free to post on the forums if you need any general TurnKey assistance. We’re here to help and happy to have you as part of the TKL community!

DwayneJ's picture

DwayneJ - Sat, 2024/11/23 - 01:49

Greetings,
I am not a spammer, but I am an avid self taught learner. I like falling down rabbit holes and finding my way out. I've recently started using Turkey images on Proxmox, the file server in particular but I plan on trying others. I'm down the hole and enjoying the journey thus far. I've applied for an account and now I'm trying to comply with the terms for account activation.
My email is from a personal domain I bought because I wanted to learn more about web development. I fell down that rabbit hole which eventually led me here.
Please let me know if there is anything else I need to do to advance this process.
Regards,
DJames617

Jeremy Davis's picture

Jeremy Davis - Mon, 2024/11/25 - 04:11

Hi Dwayne. Welcome to TurnKey.

Great to have you on board. Your account is now active, and you’re all set.

If you’re new to TurnKey Linux, I recommend checking out the Getting Started Guide and our Support Forums for community discussions and tips. You might also find our Documentation Hub helpful as you dive in.

If you are after an API key, you'll need to sign up to the TurnKey Hub as well. For any Hub related questions, please ask via Hub support (little blue icon in the bottom right corner). Expected Hub support response time is within one work day.

Feel free to post on the forums if you need any general TurnKey assistance. We’re here to help and happy to have you as part of the TKL community!

adriaan de koning's picture

adriaan de koning - Sun, 2024/11/24 - 22:44

hello my name is Adriaan.
I've just discovered Turnkey's proxmox and container template. I'm want to use the turnkey linux to host my own website for learning purposes. I hope you can approve me for using the services of turnkey.org

Jeremy Davis's picture

Jeremy Davis - Mon, 2024/11/25 - 04:12

Welcome to TurnKey.

Great to have you on board. Your account is now active, and you’re all set.

If you’re new to TurnKey Linux, I recommend checking out the Getting Started Guide and our Support Forums for community discussions and tips. You might also find our Documentation Hub helpful as you dive in.

If you are after an API key, you'll need to sign up to the TurnKey Hub as well. For any Hub related questions, please ask via Hub support (little blue icon in the bottom right corner). Expected Hub support response time is within one work day.

Feel free to post on the forums if you need any general TurnKey assistance. We’re here to help and happy to have you as part of the TKL community!

Jeroen - Wed, 2024/11/27 - 12:16

Could you please activate my turnkey Linux account? It has been a while since I registered, and I did not notice you have to post here for activation.

Jeremy Davis's picture

Jeremy Davis - Wed, 2024/11/27 - 20:38

Hi Jeroen.

Yeah it's a PITA for all of us. Hopefully we'll get something better sorted early next year. Anyway...

Great to have you on board. Your account is now active, and you’re all set.

If you’re new to TurnKey Linux, check out the Getting Started Guide and our Support Forums for community discussions and tips. You might also find our Documentation Hub helpful as you dive in.

If you are after an API key, you'll need to sign up to the TurnKey Hub as well. For any Hub related questions, please ask via Hub support (little blue icon in the bottom right corner). Expected Hub support response time is within one work day.

Feel free to post on the forums if you need any general TurnKey assistance. We’re here to help and happy to have you as part of the TKL community!

Roland's picture

Roland - Thu, 2024/11/28 - 10:11

Hello! I just started using the TurnKey Linux containers today in ProxMox and am trying to make this account so I can get an API Key for my NextCloud container
Thank you

Jeremy Davis's picture

Jeremy Davis - Fri, 2024/11/29 - 03:07

Hi Roland, welcome to TurnKey.

Great to have you on board. Your account is now active, and you’re all set.

If you’re new to TurnKey Linux, check out the Getting Started Guide and our Support Forums for community discussions and tips. You might also find our Documentation Hub helpful as you dive in.

If you are after an API key, you'll need to sign up to the TurnKey Hub as well. For any Hub related questions, please ask via Hub support (little blue icon in the bottom right corner). Expected Hub support response time is within one work day.

Feel free to post on the forums if you need any general TurnKey assistance. We’re here to help and happy to have you as part of the TKL community!

Thefir's picture

Thefir - Thu, 2024/11/28 - 10:42

Hi all ! I just started using the TurnKey Linux containers today with Proxmox.
I look forward to your approval.
Thanks for your time have a wonderful day !

Jeremy Davis's picture

Jeremy Davis - Fri, 2024/11/29 - 03:08

Hi Thefir, welcome to TurnKey.

Great to have you on board. Your account is now active, and you’re all set.

If you’re new to TurnKey Linux, check out the Getting Started Guide and our Support Forums for community discussions and tips. You might also find our Documentation Hub helpful as you dive in.

If you are after an API key, you'll need to sign up to the TurnKey Hub as well. For any Hub related questions, please ask via Hub support (little blue icon in the bottom right corner). Expected Hub support response time is within one work day.

Feel free to post on the forums if you need any general TurnKey assistance. We’re here to help and happy to have you as part of the TKL community!

HoraryZero's picture

HoraryZero - Sat, 2024/11/30 - 22:26

New account

Jeremy Davis's picture

Jeremy Davis - Mon, 2024/12/02 - 22:45

Welcome to TurnKey. Your account is now active.

If you’re new to TurnKey Linux, check out the Getting Started Guide and our Support Forums for community discussions and tips. You might also find our Documentation Hub helpful as you dive in.

If you are after an API key, you'll need to sign up to the TurnKey Hub as well. For any Hub related questions, please ask via Hub support (little blue icon in the bottom right corner). Expected Hub support response time is within one work day.

Feel free to post on the forums if you need any general TurnKey assistance. We’re here to help and happy to have you as part of the TKL community!

Paul's picture

Paul - Sun, 2024/12/01 - 17:37

hello everyone,

I wanted to reply to this post here

https://www.turnkeylinux.org/forum/support/thu-20190530-1643/turnkey-cor...

and therefore need the activation (I have the same message).

Regards
Paul

Jeremy Davis's picture

Jeremy Davis - Mon, 2024/12/02 - 22:47

Hi Paul, thanks for signing up and reporting the issue. As of about 24 hours ago, it should be all good again.

Great to have you on board.

If you’re new to TurnKey Linux, check out the Getting Started Guide and our Support Forums for community discussions and tips. You might also find our Documentation Hub helpful as you dive in.

If you are after an API key, you'll need to sign up to the TurnKey Hub as well. For any Hub related questions, please ask via Hub support (little blue icon in the bottom right corner). Expected Hub support response time is within one work day.

Feel free to post on the forums if you need any general TurnKey assistance. We’re here to help and happy to have you as part of the TKL community!

photonzz's picture

photonzz - Mon, 2024/12/02 - 15:03

Hi,
I am a new user of Turnky Linux containers. I am setting up a new account so I can try the file server container in Proxmox. Looking forward to getting the API key and learning on the user forums :) Email address is provided by ProtonMail hide-my-email aliases.
Cheers.

Jeremy Davis's picture

Jeremy Davis - Mon, 2024/12/02 - 22:48

Thanks for trying TurnKey and signing up to our forums. It's great to have you on board.

If you’re new to TurnKey Linux, check out the Getting Started Guide and our Support Forums for community discussions and tips. You might also find our Documentation Hub helpful as you dive in.

If you are after an API key, you'll need to sign up to the TurnKey Hub as well. For any Hub related questions, please ask via Hub support (little blue icon in the bottom right corner). Expected Hub support response time is within one work day.

Feel free to post on the forums if you need any general TurnKey assistance. We’re here to help and happy to have you as part of the TKL community!

Jan Holbo Kaddu Rasmussen's picture

Jan Holbo Kaddu Rasmussen - Mon, 2024/12/02 - 16:02

Hi all!
I am currently using the TurnKey NextCloud LXC container and has done so for some time now. I have upgraded NextCloud through its webbased upgrade system, I am currently running NextCloud Hub 9/30.0.2. turnkey-version gives "turnkey-nextcloud-17.2-bullseye-amd64"

This gives me warnings that both MariaDB and PHP are now deprecated.

From time to time, I have logged into the container and also done a apt update/upgrade - this may possibly be counterproductive?

I saw somewhere that there is a turnkey 18 somewhere - how do I upgrade to that version? And will it upgrade MariaDB to 10.6<11.6? and PHP to 8.2/8.3?

Also I am wondering if it would help performance to split the install between solidstate for the OS+Appliance and spinning rust for the data files (the "dropbox" part of NC)?

Oh and then I would like to have my account verified :-)

Jeremy Davis's picture

Jeremy Davis - Tue, 2024/12/03 - 05:51

Welcome to the TurnKey forums. Your account is now active, so you're good to go.

Rather than answer your question(s) here in this thread, I've reposted your questions in the support forums and will reply there.

Chat more soon. :)

Douglas's picture

Douglas - Thu, 2024/12/05 - 08:27

Hello! New here awaiting approval.

Jeremy Davis's picture

Jeremy Davis - Thu, 2024/12/05 - 22:30

Thanks for trying TurnKey and signing up to our forums. It's great to have you on board.

If you’re new to TurnKey Linux, check out the Getting Started Guide and our Support Forums for community discussions and tips. You might also find our Documentation Hub helpful as you dive in.

If you are after an API key, you'll need to sign up to the TurnKey Hub as well. For any Hub related questions, please ask via Hub support (little blue icon in the bottom right corner). Expected Hub support response time is within one work day.

Feel free to post on the forums if you need any general TurnKey assistance. We’re here to help and happy to have you as part of the TKL community!

Enut - Thu, 2024/12/05 - 17:50

Installed TurnKey GitLab LXC (debian-12-turnkey-gilab_18.1-1_amd64.tar.gz) on Proxmox. Initially confused between LXC and GitLab login credentials, but figured it out eventually.

I also ran into the "OpenSSL::Cipher::CipherError" that prevented the initial root login to the GitLab GUI. Creating a random user account through "Register now" appeared to fix it. After that, root login to the GitLab GUI was successful.

Jeremy Davis's picture

Jeremy Davis - Thu, 2024/12/05 - 22:55

Thanks for trying TurnKey and signing up to our forums. It's great to have you on board.

Thanks too for sharing your GitLab appliance feedback. It's really useful (albeit a bit disappointing) to hear that initial log in is still an issue. Regardless, I'd rather know than not. Hearing how you worked around it is also really useful.

FYI initial login issues with GitLab has been an ongoing issue... We keep thinking we've fixed it but it keeps causing problems. :( FWIW we do basic smoke tests prior to public release and I can confirm that it worked ok when I tested it prior to release. But obviously it's still not working reliably. I wonder if there is some sort of race condition on firstboot that means that it works sometimes (at least in initial testing) but then fails some other times? An updated rebuild is in progress so, we'll have a closer look at this issue - again.

Regardless, if you’re new to TurnKey Linux, check out the Getting Started Guide and our Support Forums for community discussions and tips. You might also find our Documentation Hub helpful as you dive in.

If you are after an API key, you'll need to sign up to the TurnKey Hub as well. For any Hub related questions, please ask via Hub support (little blue icon in the bottom right corner). Expected Hub support response time is within one work day.

Feel free to post on the forums if you need any general TurnKey assistance. We’re here to help and happy to have you as part of the TKL community!

milocheri's picture

milocheri - Fri, 2024/12/06 - 23:36

Hello Good afternoon
My name is Hermilo Gonzalez, I just started using the TurnKey Linux containers today in Proxmox, looking for account aproval to post some issues i have whit the lastest update for Wordpress, thank you!

Jeremy Davis's picture

Jeremy Davis - Mon, 2024/12/09 - 02:09

Thanks for trying TurnKey and signing up to our forums. It's great to have you on board.

We’re here to help and happy to have you as part of the TKL community!

We welcome your feedback, good, bad or ugly! :) Feel free to post on the forums. I'll try to respond ASAP.

Stefan's picture

Stefan - Sat, 2024/12/07 - 21:40

Hello,
Just started my journey with proxmox and wanted to try out some of the TKL appliances. I am really excited about this LXC and virtualization stuff.

Greetings,
Stefan

Jeremy Davis's picture

Jeremy Davis - Mon, 2024/12/09 - 02:09

Thanks for trying TurnKey and signing up to our forums. It's great to have you on board.

If you’re new to TurnKey Linux, check out the Getting Started Guide and our Support Forums for community discussions and tips. You might also find our Documentation Hub helpful as you dive in.

If you are after an API key, you'll need to sign up to the TurnKey Hub as well. For any Hub related questions, please ask via Hub support (little blue icon in the bottom right corner). Expected Hub support response time is within one work day.

Feel free to post on the forums if you need any general TurnKey assistance. We also love to get feedback, the good that bad and the ugly! :) Regardless, we’re here to help and happy to have you as part of the TKL community!

Bill Capps's picture

Bill Capps - Mon, 2024/12/09 - 07:25

I've been diving into the world of Proxmox and Turnkey Linux has been a huge help. I'm looking forward to getting my account fully approved so that I can participate even more. Thanks!

Jeremy Davis's picture

Jeremy Davis - Tue, 2024/12/10 - 12:42

Sorry I was a bit slow to actually reply with a welcome, but I see you've been able to log in, so that's great.

I'm really glad to hear that TurnKey has been helpful for you and it's great to have you on board.

Feel free to post on the forums with anything you think is relevant. Support requests, feature ideas, improvements and/or feedback are all welcome. :)

I try to be fairly responsive but if you see someone else has a question or needs a hand and you have some ideas, please feel free to jump in and share.

Regardless, we’re happy to have you as part of the TKL community!

ADACHI Yuki's picture

ADACHI Yuki - Thu, 2024/12/12 - 02:30

Hi.
Please approve my account.
I wanted a home lab for easy self-study and installed Proxmox 8.3. That's how I found out about TURNKEY LINUX. Thanks to the developers.

Jeremy Davis's picture

Jeremy Davis - Thu, 2024/12/12 - 03:35

Welcome to TurnKey, great to have you here as a part of our community. Thanks too for your kind wishes.

If you’re new to TurnKey Linux, check out the Getting Started Guide and our Support Forums for community discussions and tips. You might also find our Documentation Hub helpful as you dive in.

If you are after an API key, you'll need to sign up to the TurnKey Hub as well. For any Hub related questions, please ask via Hub support (little blue icon in the bottom right corner). Expected Hub support response time is within one work day.

Feel free to post on the forums if you have any problem, questions, suggestions or any other sort of feedback. We're happy to have you as part of the TKL community!

Vincent's picture

Vincent - Fri, 2024/12/13 - 04:35

Hello! I just started using the TurnKey Linux containers in Proxmox PVE and I am trying to make this account so I can get an API Key .

Thanks for your time, this post was a great help!

Jeremy Davis's picture

Jeremy Davis - Fri, 2024/12/13 - 05:15

Thanks for trying TurnKey and signing up to our forums. It's great to have you on board.

To get an API key, you'll need to sign up to the TurnKey Hub as well. For any Hub related questions, please ask via Hub support (little blue icon in the bottom right corner). Expected Hub support response time is within one work day.

If you’re new to TurnKey Linux, check out the Getting Started Guide and our Support Forums for community discussions and tips. You might also find our Documentation Hub helpful as you dive in.

Feel free to post on the forums if you need any general TurnKey assistance and/or have suggestions of feedback for us - the good that bad and the ugly! :) Regardless, we’re here to help and happy to have you as part of the TKL community!

Vincent's picture

Vincent - Fri, 2024/12/13 - 06:00
Thank you for approving my account.
Nehemoth's picture

Nehemoth - Fri, 2024/12/13 - 14:03

Hi. I'd arrived here after reading the automatically generated email when you sign up.

I want an account, sadly, to ask for some projects, specifically ActualBudget and Firefly III.
I'm running Proxmox on an old Dell Micro PC.
PS: What a nice list of projects included in Proxmox, I hope that I can use some of those.

Also, I just checked my list of things that I want to implement in a feature and realized that there are several one that don't exist, maybe I'm a little confuse about this project (turnkey).

Anyway my list it's as follow:
Pihole
Deluge (torrent box)
Portainer
Plex Media Server
Traefik Proxy
Dashy (dashboard)
Watchtower
Android?

Jeremy Davis's picture

Jeremy Davis - Mon, 2024/12/16 - 12:58

Thanks for trying TurnKey and signing up to our forums. It's great to have you on board.

We're happy to have your appliance requests. Although TBH we're pretty short on resources and have a huge backlog. So unless you and/or another community member are able to do the lion's share of the development work, I have no idea when we might get a chance to get to them.

Re your specific requests/suggestions (I added the 2 inline too):

  • ActualBudget - never heard of it before but from a glance looks good
  • Firefly III - this one has been suggested before and we even had a guy that started work on it but he never got it finished and I haven't seen him around for a while now...
  • Pihole - this is one that's been asked for before and we'd really love to add to the library
  • Deluge (torrent box) - we already have a Torrent server although it uses Transmission instead of DelugeProxy>
  • Portainer - this another that's been asked for and we're quite keen to look at it. One of the issues we have though is that Docker doesn't run nice in LXC. It can be made to run, but many Proxmox users would just assume it was broken. Also it's not really ideal to run Docker in LXC anyway. Regardless, we are working out how we might do some more dockery stuff...
  • Plex Media Server - this has been asked for before, but unfortunately AFAIK Plex is "freeware" - but it's not open source. Unless they release an open source server version it's not going to happen... We do have a Mediaserver appliance that has Jellyfin though. Perhaps that might suit your purposes?
  • Traefik Proxy - Yeah, I reckon a Traefik Proxy appliance would be a good one! I don't know much about Traefik, but have looked at it briefly and it looks like a good thing
  • Dashy (dashboard) - never head of it, but perhaps?
  • Watchtower - looks interesting, but again docker...
  • Android? - Do you mean Android as in the smart phone OS? I don't think I really understand..?

    Feel free to post on the forums if you have any more ideas or want to ahve a crack at building one of these appliances. Also obviously if you need any general TurnKey assistance and/or have more suggestions of feedback for us. We’re here to help and happy to have you as part of the TKL community! :)

derpuma's picture

derpuma - Mon, 2024/12/16 - 15:21

I would like to use the Tunrkey Nextcloud LCX on my Webserver.
As my webserver can only serve the domains with a public IPv6 addresses (no public IPv4 addresses availabe), I use cloudflare DNS proxy, to get a valid pubic Ipv4 address for my nextcloud instance. This works great and I am able to run nextcloud, get updates and installing apps.
But I've come over one problem with renewing the certificates for my domain. For the first three month all was good, and the nextcloud was secured with a cloudflare edge-certificate, but this ran out today and I was not able to renew the certificate.
Openconfconsole shows me an error:
dehydrated-wrapper: FATAL: │ │ dehydrated exited with a non-zero exit code.
In short, I would like to get some help, to solve this issue and learn how to get valid certificates with the use of cloudflares proxy DNS function.
If this forum could help me, would be great!
Therefore I look forward to your approval so that I may seek assistance on the forums.
Thx a lot in advance!
-----
Reposted to support forum: https://www.turnkeylinux.org/forum/support/tue-20241217-1135/nextcloud-l...

Jeremy Davis's picture

Jeremy Davis - Tue, 2024/12/17 - 02:44

Firstly welcome to the TurnKey forums. Your account has been approved so when logged in you can start new threads in our forums and post comments without needing to wait for them to be approved.

Sorry to hear of your issue, but thanks for reporting it. I have reposted your question/issue as a new thread on our support forums and I will reply over there ASAP. Hopefully we can work it out. Assuming we can, then I'll document it and ideally implement a fix/improvement ASAP.

Ericito Reno's picture

Ericito Reno - Thu, 2024/12/19 - 19:32

Started using CTs under Proxmox and found most of the available images under pveam to be turnkey images so thought I'd muck about with them and see if it's a fit for how I go about things. I'm 30 years in the I.T. field but a bit ignorant to things outside of servers and networking - so I just keep trying to learn more things. Anywho... should be enough to tell I'm not spam. ;-) Maybe. Maybe not. All this A.I., one never knows. Maybe I should use more ellipse's to show I'm GenX? :-)

Ericito Reno
Three Decades of being a Professional Introvert
Be Kind, Rewind
Jeremy Davis's picture

Jeremy Davis - Fri, 2024/12/20 - 03:24

Hi Ericito, welcome to TurnKey :)

Glad to hear that you found our LXC builds within Proxmox. Glad to hear that they may be of some use to you going forward.

Out of interest, is your server experience with Linux, Windows, a bit of both or something else? If Linux what distro have you used most? Regardless, with your server & network experience I suspect that you may have some insights or perspective that might be useful for us.

We always welcome all contributions. Obviously helping out with technical stuff like our server appliances or our custom software is always great. But all contributions are warmly welcomed; bug/problem reports, friction points, missing features and/or any other feedback is really useful. It gives us insight into what is valuable and/or not to our users and means we can hopefully make TurnKey better for everyone in the future. So please do not hesitate to start a new thread in the forums.

PS your comment on ellipses is so funny - I'm gen x and use too many all the time... :p

ryan.ss.kim's picture

ryan.ss.kim - Fri, 2024/12/20 - 08:47

Thank you for your service.
I would like to configure my own HOMELAB CI/CD chain using TurnKey.

ryan.ss.kim's picture

ryan.ss.kim - Fri, 2024/12/20 - 08:54

Hello! I just started user to TurnKey Linux containers today in ProxMox
i wanna make cicd tool chain for my lab using using your TKL
Thanks for your time, this post was a great help!

Jules Stz's picture

Jules Stz - Sat, 2024/12/21 - 08:55

Hello, I am waiting for my Account Activation because of Proxmox.
It is the first time that I run my own Homelab and I'm very exited about it :)

And I have to say honestly, that you are acting really professional about your Service (Spam safety/Spam Securi;ty precautions!)

I Hope that my Account get's fast Approved and that there are no troubles, if there should bei anything, please contact me and we can Phone us together about the problem.

Have a good day and Thanks!

Greetings
Jules

Steven Gott's picture

Steven Gott - Sat, 2024/12/21 - 22:54

Hey Jeremy! I'm a manufacturing engineer with aspirations to break into dev ops. Been working with Proxmox for the last few months so have obviously encountered turnkey! Trying to set up a game server for nieces and nephews to play minecraft so here I am. Appreciate your time!

Kyrine's picture

Kyrine - Thu, 2024/12/26 - 12:42

Hello
I just started using the TurnKey Linux containers with ProxMox and i need account to test more functionality (api key ...)

Apu Velappan's picture

Apu Velappan - Fri, 2024/12/27 - 06:22

Please approve my account.

Drew Swanner's picture

Drew Swanner - Fri, 2024/12/27 - 23:07

I am a Developer setting up a home lab again and wanted to use turnkey to help maintain my systems. I

Drew

ThePretendCarrot's picture

ThePretendCarrot - Sat, 2024/12/28 - 11:33

Hello I seen a backup feature in Proxmox when I was playing with it. So I went to make an account and I have to jump through a bunch of Hoops.I just need the API key or something? I don't intend to post anything

Pages

Add new comment